We’ve developed a range of easy-to-apply adhesive safety labels for use on pressure gauges and dial thermometers. The labels make it easy to see if the readings from your instruments are within tolerance, helping to improve operational safety and efficiency.
Applied onto the outside window of the instrument, they can be retro-fitted onto existing equipment making them a cost-effective and quick alternative to replacing gauges or thermometers. Easy to apply and cut where required, you can create your own scale ranges using red and green circular arcs for the instrument size. The labels are also transparent to make sure you can get an accurate reading of the values below.
Each pack contains an equal number of red and green labels. Choose from label sets for use on 63mm diameter, 100mm diameter and 150mm diameter pressure gauges and dial thermometers:
MODELS-63RGAL – for instrument size 63mm (2½inch). Pack of 12 red and 12 green labels.
MODELS-100RGAL – for instrument size 100mm (4 inch). Pack of 6 red and 6 green labels.
MODELS-150RGAL – for instrument size 150mm (6 inch). Pack of 3 red and 3 green labels.
Using high-quality adhesive material, our labels are temperature- and UV-resistant as well as resistant to most petroleum-based oils, greases and aliphatic solvents, mild acids, alkaline and salts. They are therefore suitable for use in most environments. Stable for the long term, the estimated use life of each label if it is correctly applied is roughly three to five years.
To find out more, take a look at our factsheet, or contact our sales team today.
Models-63RGAL, 100RGAL & 150RGAL
|Models-63RGAL, 100RGAL & 150RGAL Factsheet||535.80 KB||15/04/2019||DownloadPreview|